EasyManua.ls Logo

Olivetti OFX 550 - Page 27

Olivetti OFX 550
83 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
15
A
Procedure DISPLAY
1
Ensure that the display
shows the initial waiting
mode with date and
time.
AUTOMATIC RX
21-03-99 10:50
2
Insert the document in
ADF. The display shows
the original values for
contrast and resolution:
NORMAL and STD
(standard), respectively.
DOCUMENT READY
ê
NORMAL
If the document you are about to send is particularly
light or dark, or contains very small characters or
drawings, change the pre-set contrast and resolution
values, using the CONTRAST and RESOLUTION
keys.
3
Dial the number (max.
52 digits) directly on the
numeric keypad of your
fax to select the remote
party to whom you want
to send your document.
TYPE NUMBER
125 230223
If you dial the wrong number: position the cursor using
the </> keys, on the wrong number and overwrite with
the correct number. If you want to delete the number
completely, press the CLEAR key.
4
"Press the START key.
The fax machine starts
transmitting.
At the end, the
message "TX
COMPLETED" is
displayed for a few
seconds and then the
initial waiting mode.
AUTOMATIC RX
21-03-99 10:51
B
Procedure DISPLAY
1
Ensure that the display
shows the initial waiting
mode with date and
time.
AUTOMATIC RX
21-03-99 10:50
2
Insert the document in
ADF. The display shows
the original values for
contrast and resolution:
NORMAL and STD
(standard), respectively.
DOCUMENT READY
ê
NORMAL
3
Pick up the phone by
lifting the handset.
TEL CALL
4
Dial the number (max.
52 digits) directly on the
numeric keypad of your
fax to select the remote
party to whom you want
to send your document.
If the remote party’s fax machine is set up for
automatic reception, you will hear the fax machine’s
tone.
If it is set up for manual reception, a person will pick
up the phone. Ask them to press the start key on the
fax machine, after which you will wait to hear the fax
machine’s tone
.
5
Press the
START
key to
start transmitting and
hang up the handset.
At the end of the
transmission, the
message “TX
COMPLETED” will be
displayed and then the
initial waiting mode.
AUTOMATIC RX
21-03-99 10:51
If, at the end of the transmission, you forgot to hang
up the handset, the fax machine will emit an audible
warning
to remind you to
hang up
.
-3-13-31.p65 02/04/01, 9.1815

Table of Contents

Related product manuals