Olivetti PR4 SLIP - Selecting the Parameters

4-4XYAA6338
4.2.3 Selecting the Parameters
After accessing Setup as explained in the section
Accessing Setup (Section 4.2.1), pressing one of the
two buttons on the control console will cause the
machine to print the first main menu.
By successively pressing the 1 - SKIP key, a new LED
lighting sequence is initiated and a new menu is made
available. This menu can only be accessed by pressing
the 2 - OK key.
The selection of the LED lighting sequences is cyclical
(see the table at the beginning of this chapter).
The selection of all the parameters needs to be completed
in order to be able to exit from the Setup/Adjustment
function.