DMTA-10043-01EN, Rev. C, July 2016
Chapter 1
20
Down arrow
• In a screen or a list, moves to the next
element.
• For some parameters, decreases the value of a
numerical entry.
Left arrow
• Selects the previous available value for the
selected parameter.
• In text edit mode, moves the cursor one
character position to the left.
Right arrow
• Selects the next available value for the
selected parameter.
• In text edit mode, moves the cursor one
character position to the right.
Velocity calibration — Switches to the
semiautomatic material velocity calibration mode.
Velocity — Opens a screen allowing you to view
and manually change the sound velocity.
Zero calibration
• Compensates for transducer zero, or enables
the step block zero calibration.
• With the traditional text edit mode only,
inserts a character at the cursor position.
Do-ZERO — Compensates for transducer delay
for dual element transducers.
Setup menu — Provides access to instrument
parameters (measurement, system, display, alarm,
differential mode, and communication menu).
Table 3 Keypad functions (continued)
English International Functions
To Next Page
Loading...
