DMTA-10043-01EN, Rev. C, July 2016
Labels and Symbols
1
Labels and Symbols
Safety-related labels and symbols are attached to the instrument at the locations
shown in Figure i-1 on page 1. The symbols are described in Table 1 on page 2 and
Table 2 on page 3. If any or all of the labels or symbols are missing or illegible, please
contact Olympus.
Figure i‑1 Labels locations
Location of serial number label
(see Table 1 on page 2)
Location of instruction and rating
label (see Table 1 on page 2)
To Next Page
Loading...
