120
Read Before Connecting to a
Computer
Connecting the camera to a personal computer using the included USB
(Universal Serial Bus) cable allows you to transfer images stored on the
SmartMedia card installed in the camera to the computer’s hard disk.
Using the USB cable to connect the camera and computer may require
a computer equipped with a USB connector and certain pieces of
supporting software (driver), which will vary (see below) depending on
the computer’s operating system.
Please consult the computer manufacturer for more information about
your computer’s operating system and the level of USB support.
*1 For Macintosh computers running Mac OS 8.6, systems with the following
specification have been verified as to be compatible.
• Standard USB equipped.
• Mac OS 8.6 and USB MASS Storage Support 1.3.5 have been preinstalled at
the time of shipment.
Contact Apple Computer, Inc. for USB support.
*2 Newest version download, able from the Olympus Website, too.
Playing movie pictures on the computer requires QuickTime 4.0 or
higher. QuickTime 4.0 is available on the included software CD.
Operating System
Software Needed for
Connection
Notes on
First-Time Use
Windows 2000 Professional
Windows Millennium Edition (Me)
Mac OS 9~9.1
*1
None None
Windows 98
Windows 98 Second Edition (98SE)
USB driver *2
(included software
CD)
Install the USB driver
software after
connecting the USB
cable (p.124).
Windows 95
Windows NT
System 7.5.1~Mac OS 8.5.1
USB connections are not supported. Use
other transfer methods such as a floppy disk
adapter (sold separately), etc. (p.134).
To Next Page
Loading...
Need help?
General
