59
4
Taking Better Pictures
Using the Selftimer
For when the photographer wants to be in the picture.
Using a tripod is highly recommended.
1 Secure the camera on the
tripod.
2 Open the lens barrier.
• The camera turns on in
shooting mode.
3 Press ( ) on the arrow
pad.
• The monitor will illuminate.
4 Press on the arrow pad
repeatedly until the selftimer
mark is displayed on the
monitor.
5 Set up your shot, then
full-press the shutter button.
• The selftimer lamp lights up for
ten seconds, then blinks for
two seconds before the picture
is taken.
• The selftimer automatically
goes off after the picture is
taken.
To cancel the selftimer
To cancel the selftimer function
after step 3, press on the arrow
pad so that the selftimer mark
disappears. Or, the selftimer can
also be cancelled simply by turning
the camera off.
While the selftimer lamp is
illuminated, it can be canceled by
pressing the OK button.
To Next Page
Loading...
