19
Checking the Monitor
Is the Card Inserted?
If you forget to insert the card, or if there is any other problem with the
card, the monitor will display a message. Read the message and correct
the problem.
When the “NO CARD” error
message is displayed:
• The card may not be inserted
properly.
• Turn the power off (p.34). Then
remove and re-insert the card.
For other error messages:
• Follow the directions on the
monitor. For details, see “Error
Codes” (p.142).
When the card setup
screen is displayed:
• You have inserted a card which
needs to be formatted. When a
card is formatted, all of the
recorded images on the card are
deleted.
For details, see “To Initialize
(Format) a Card” (p.116, 117).
2
Learning the Basics
Monitor
Monitor (Card Setup)
To Next Page
Loading...
