Taking Movie Pictures
In addition to still pictures, this camera has the ability to take movie (15
frames/sec.). Take advantage of this feature to capture your subjects in
motion.
1 Open the lens barrier.
• The camera turns on in
shooting mode.
2 Press on the arrow pad.
• The monitor will illuminate.
3 Press on the arrow pad
repeatedly until the
(movie) mark is
displayed on the monitor.
• The subject is displayed on
the monitor.
• Also, the no flash mark ( )
appears on the monitor (p.67).
4 Position the subject in the
picture frame, then press the
shutter button all the way
down.
• The bottom of the memory
gauge on the monitor will
illuminate and the remaining
second count will begin
decreasing.
• The flash will not activate.
60
To Next Page
Loading...
