45
3
Playing Images Back
One-Frame Erase
Erasing unneeded pictures frees storage space for further picture-
taking. Storage space increases by an amount equivalent to that taken
by the pictures that have been erased.
One-frame erase cannot be used when a picture is protected, or a write-
protect seal is on the card. To erase these pictures, you must cancel the
protection feature or remove the write-protect seal from the card (The write-
protect seal may not be reused after it has been removed from the card).
1 With the lens barrier closed,
press the monitor button
().
• The camera turns on in
playback mode. The most
recent frame is displayed on
the monitor.
2 Select the picture you want to
erase by pressing the arrow
pad.
• You may also use one-frame
erase in either one-frame
display (p.38) or in the index-
display setting (p.39, 40).
3 Press ( ) on the arrow
pad for at least 1 second.
• The one-frame erase screen is
displayed.
• To cancel one-frame erase,
press .
4 Select “YES” by pressing or
, then press the OK button.
• The camera beeps once and
erases the picture.
To erase all pictures
You may also erase all pictures stored on the card at once (p.115).
To Next Page
Loading...
