78
17. Click on [System].
18. When the [System Properties] dialog box appears, click on
[Hardware] and then on [Device Manager].
14. Take out the CD-ROM.
15. To check that the installation is completed successfully, click
on the [Start] button and then click on [Control Panel].
16. Click on [Performance and Maintenance].
19. If there is [OLYMPUS(R) MICROSCOPE 1394 DIGITAL CAM-
ERA SYSTEM] under [1394 Bus Host Controllers], it means
the installation has been executed correctly. After confirm-
ing it, clock on the [
] button.
} If your PC has multiple 1394 connectors, the DP21 cannot
operate unless “OLYMPUS
R
MICROSCOPE 1394 DIGITAL
CAMERA SYSTEM” is installed for the PC’s 1394 connector
to which the DP21 is connected. If the DP21 does not run,
check the connected 1394 connector and make sure to
connect the DP21 is to a connector for which “OLYMPUS
R
MICROSCOPE 1394 DIGITAL CAMERA SYSTEM” is installed.
To Next Page
Loading...
