55
Chapter 4: Configuring EXVoice for Using the DS-4000 Recorder
• Folders – These are not used with the Olympus DS-4000.
5. Click Assign data at the bottom of the dialog box to save the settings to
the recorder and close the dialog box.
6. Select File > Configure DS-4000 path. The DS-4000 Folder dialog
box opens.
7. Click the ellipsis icon and browse to the root directory (not a subfolder)
of the removable drive assigned to the Olympus recorder by your
computer. The drive letter assigned varies from computer to computer.
The Olympus Uploader utility searches all five folders (A through E)
on the device.
8. Refer to “
Uploading a Test Dictation” beginning on page 57 to create a
dictation and test the upload process.
Reassigning a Recorder in EXVoice 6.5
At times, you may need to assign an Olympus recorder to a different
provider. This can be done by a system administrator at any workstation on
which the Olympus Uploader has been installed and configured.
Note: If your facility is using EXVoice Version 7.x, refer to “Assigning a
Recorder (EXVoice 7.x)” beginning on page 52 for the installation
procedures.
To Next Page
Loading...
