48
Olympus
®
DS-4000 Digital Recorder Installation and User Guide
9. Click OK to close the Modifying master profile dialog box, and then
click OK to close the Modifying User dialog box.
Configuring the Master Profile in EXVoice
6.5
If your facility is using EXVoice Version 6.5, use these procedure to modify the
master profile on the Lucid/PJL/OIUp tab for Olympus providers.
Note: If your facility is using EXVoice Version 7.x, refer to “Configuring
the Master Profile in EXVoice 7.x” beginning on page 45 for the
configuration procedures.
To configure the master profile using EXVoice Version 6.5:
1. In the EXVoice Explorer left pane, open the appropriate site and
expand Master Profiles.
2. Right-click the master profile and select Modify Master Profile. The
Modifying master profile dialog box opens.
3. Select the Lucid/PJL/OlUp tab.
4. In the Require id field edits when jobs are created with group box,
be sure that the Olympus check box is not checked.
Note: The Require ID field edits when jobs are created with
option is only used for Personal Job Lister systems.
To Next Page
Loading...
