23
Chapter 2: Installing the Olympus
®
DSS Player Pro Software
3. Delete the Directrec Configuration Tool shortcut if it is listed in the
Startup folder.
a. Right-click the Directrec Configuration Tool shortcut.
b. Select Delete from the shortcut menu to delete this shortcut and
remove it from the Startup folder.
Olympus Device Detector 3
The Olympus Device Detector 3 is a memory-resident program that senses
when an Olympus digital recorder is connected to the PC. The Device Detector
3 must be present in the Startup menu so it starts automatically each time you
start your PC. The Device Detector 3 icon in the Notification Area indicates
the program is running in the background to sense when the DS-4000 recorder
is connected and facilitates communication between the recorder and the
Dictaphone EXV Olympus Uploader application. Refer to “Installing the
Olympus Uploader” on page 28 for information about this program.
To configure the Device Detector 3 program:
1. Look at the Notification Area at the bottom of your Windows display
to see if the Olympus Device Detector3 icon is displayed.
To Next Page
Loading...
