Omicron Bode 100 User Manual

133
Troubleshooting
11 Troubleshooting
11.1 USB Cable and/or Power Supply to the
Bode 100 Is Missing
If the serial number field in the status bar displays No Device on red background
then the Bode Analyzer Suite does not communicate with the Bode 100.
Solution: Connect the USB cable to the computer and the Bode 100 and check
the power supply. Then click the Search and Reconnect Device toolbar
button to connect the Bode 100 with the computer.
11.2 Lost Communication
The loss of the power supply and other events can cause loss of communication
between the Bode 100 and the computer. In this case, the serial number field in
the status bar displays No Device on red background.
Solution: Click the Search and Reconnect Device toolbar button to
connect the Bode 100 with the computer.
11.3 Cannot Select Frequencies Lower Than 10 Hz
To activate the extended frequency range of 1 Hz…40 MHz, click Options on
the Tools menu, click the Measurement tab, and then select the
Measurement Range 1 Hz - 40 MHz option (see 8.2 "Setting the Measurement
Range" on page 98).
Note: The activation of the measurement range of 1 Hz…40 MHz will increase
calibration times including the internal calibration performed at the startup and
each time you reconnect to the Bode 100.

Omicron Bode 100 Specifications

General

Brand	Omicron
Model	Bode 100
Category	Measuring Instruments
Language	English