Omicron Bode 100 - Technical Data; Bode 100 Specifications

135
Technical Data
12 Technical Data
12.1 Bode 100 Specifications
Table 12-1:
Bode 100 specifications
Characteristic Rating
Frequency range
(selectable by the
Bode Analyzer Suite)
10 Hz…40 MHz or
1Hz…40MHz
(extended frequency range)
OUTPUT connector
Output impedance 50 Ω
Connector BNC
Wave form Sinusoidal signal
Output voltage 0.01…1 Vrms into 50 Ω load
–27 dBm…13 dBm
CH 1 INPUT, CH 2 INPUT connectors
Input impedance Low or high impedance selectable
Low impedance Input impedance 50 Ω
High impedance
Input impedance 1 MΩ ±2%
Input capacitance 40…55 pF
Connectors BNC
Receiver bandwidth 1 Hz, 3 Hz, 10 Hz, 30 Hz, 100 Hz,
300 Hz, 1 kHz, 3 kHz
Input attenuator 0 dB, 10 dB, 20 dB, 30 dB, 40 dB
Input sensitivity 100 mV full scale
for input attenuator 0 dB
Dynamic range > 100 dB at 10 Hz receiver bandwidth
Gain error < 0.1 dB (calibrated)
Phase error < 0.5º (calibrated)
USB interface
Connector Type B