OMICRON 11
Safety instructions
1.6 Orderly measures
The CP TD12/15 User Manual or alternatively the e-book must always be available at the operating site
of the CP TD12/15.
The users of the CP TD12/15 must read this manual before operating the CP TD12/15 and observe the
safety, installation, and operation instructions therein.
When setting the CP TD12/15 into operation, follow the instructions in 3 "Application" on page 25. The
CP TD12/15 and its accessories may only be used in accordance with the user documentation (including
but not limited to User Manuals, Reference Manuals, Getting Started manuals and manufacturer
manuals). The manufacturer and the distributor are not liable for damage resulting from improper usage.
Opening the CP TD12/15 or its accessories without authorization invalidates all warranty claims. Any
kind of maintenance, calibration or repair on the device itself may only be carried out by persons
authorized by OMICRON.
1.7 Static charges
Static charges on bushings or other apparatus such as transformer windings may be induced by test
potentials. While the voltage may not be significant enough to do any damage, it can be a source for
serious accidents due to falls caused by reflex action.
High static charges may also be encountered at the bushing capacitance taps if the covers are removed.
► Ground all test objects before handling.
1.8 Disclaimer
If the equipment is used in a manner not described in the user documentation, the protection provided
by the equipment may be impaired.
To Next Page
Loading...
Need help?
General
