OMICRON 5
About this manual
About this manual
This User Manual provides information on how to use the CP TD12/15 test system safely, properly and
efficiently. The CP TD12/15 User Manual contains important safety rules for working with the
CP TD12/15 and gets you familiar with operating the CP TD12/15. Following the instructions in this User
Manual will help you to prevent danger, repair costs, and avoid possible down time due to incorrect
operation.
The CP TD12/15 User Manual must be always available on the site where the CP TD12/15 is used. The
users of the CP TD12/15 must read this manual before operating the CP TD12/15 and observe the
safety, installation, and operation instructions therein.
Reading the CP TD12/15 User Manual alone does not release you from the duty to comply with all
national and international safety regulations relevant to working with and around high-voltage
equipment.
Safety symbols used
In this manual, the following symbols indicate safety instructions for avoiding hazards.
DANGER
Death or severe injury will occur if the appropriate safety instructions are not observed.
WARNING
Death or severe injury can occur if the appropriate safety instructions are not observed.
CAUTION
Minor or moderate injury may occur if the appropriate safety instructions are not
observed.
NOTICE
Equipment damage or loss of data possible
To Next Page
Loading...
Need help?
General
