4 Cleaning
4-4 Cleaning
BU100RS
4-4 Cleaning
1. Cleaning the UPS
Moisten a soft cloth with water or detergent, squeeze it tightly, and wipe the product
lightly.
Do not use chemicals such as thinner and benzene. (They cause deformation or
discoloration.)
2. Remove dust from the "AC input" plug of this product and the "power output" outlet.
Stop the connected devices and the product all and cut off the "AC input" plug from the
commercial power supply.
Then, remove dust with a dry cloth and make the connection again.
(For information on the connection procedure: see also "2-2 Connecting the equipment.")
4-5 Inspection of rack mounted condition
1. Check the screw loose
Check there are no loose screws. (See the illustration on page 24 and 26)
2. In case of loose
<Horizontal mount> Perform the work with the confirmation from page 24 section 3.
<Vertical mount> Perform the work with the confirmation from page 26 section 3.
To Next Page
Loading...
