3 - 15
3 Memory Allocations
CJ-series EtherCAT Slave Units Operation Manual (W541)
3-3 DM Area Allocations
3
3-3-2 Details of the Allocated DM Area Words
m + 10 08 to 15 IN data area type Unit 00 hex The area type code in use is indi-
cated.
• 00 hex: not used
• 01 hex: CIO Area (CIO)
• 03 hex: Data Memory (DM)
• 04 hex: Work Area (WR)
• 05 hex: Holding Relay Area
(HR)
• 08 to 14 hex: Expansion Mem-
ory (EM) bank 0 to C
*1
08 to 15 Reserved --- --- Reserved by system
m + 11 00 to 15 First word in IN
data area
Unit 0000 hex The starting word of the IN data
area in use is indicated. The
ranges vary by IN data area
type.
• CIO: 0000 to 17FF hex
• DM: 0000 to 7FFF hex
• WR: 0000 to 01FF hex
• HR: 0000 to 01FF hex
• EM: 0000 to 7FFF hex
*1
m + 12 00 to 15 IN data area size Unit 0000 hex The IN data area size in use is
indicated. The value is in bytes
from one of the following.
• 00 hex: 0 byte
• 32 hex: 50 byte
• 64 hex: 100 byte
• C8 hex: 200 byte
• 190 hex: 400 byte
*1. EM areas are not available for all CJ-series CPU Units. Refer to the operation manuals of the CPU Units for
details on the EM memory area specification.
Word Bit Name Manipulated by Default value Function
To Next Page
Loading...
Need help?
General
