133
Name Color Function
OPE Orange Lit when the control output is ON.
STAB Green Lit during stable light ON or dark ON, which can
be selected with the operation mode selector.
Note When the mode selector is set to SET, the operation indicator and stability op-
eration indicator are used to monitor teaching. Refer to 2-2 Switch Settings for
details.
Operation mode selector
L ⋅ on: Light ON
D ⋅ on: Dark ON
(Refer to 2-2 Switch Set-
tings for details)
Timer selector
0 ms: No timer
10 ms: OFF-delay timer
(Refer to 2-2 Switch Set-
tings for details)
Side View
2-1-5 Proximity Sensor Module
Sensor code connection terminals (Refer to
3-4-3 E2C-MA11 Proximity Sensor Module
for details.)
Teaching button
Mode selector (SET for teaching and RUN for normal opera-
tion) (Refer to 2-2-2 E2C-MA11 Proximity Sensor Module for
details.)
Operation indicator
(orange)
Stability operation indicator (green)
Front View
E2C-MA11
Name Color Function
OPE Orange Lit when the control output is ON.
STAB Green The stability operation indicator shows the stability
of detecting or non-detecting operations. The
stability operation indicator will be lit when a
sensing object is located 0.93 times as near as
the sensing distance or less. The stability
operation indicator will be also lit when a sensing
object is located 1.07 times as far as the sensing
distance or more.
Indicators
Indicators
Nomenclature Section 2-1
To Next Page
Loading...
