29
1-2 System Configuration
The following are CQM1H/CQM1 system configuration examples with G730 In-
terface Units.
Configuration with One Master
Master (32 input points/32 output points max.)
RS-485, 200 m max.
G730-VI (input model) G730-VO (output model) G730-RI (input model) G730-RO (output model)
Switch Sensor Lamp ValveSwitch
CQM1H/CQM1
Note 1. Switches on the Master allow input and output to be independently set to 2
words (32 points) or 1 word (16 points). Connect Slaves according to the set
number of points.
2. If both input and output are set to 2 words (32 points), up to eight Input Units
and eight Output Units can be connected, if 4-point Slaves are used.
System Configuration
Section 1-2
To Next Page
Loading...
