EasyManua.ls Logo

Omron DST1-ID12SL-1

Omron DST1-ID12SL-1
182 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
xxiii
Additional Precautions According to UL 1604 5
5 Additional Precautions According to UL 1604
DST1-ID12SL-1 and DST1-MD16SL-1 are suitable for use in Class I, Div. 2,
Group A, B, C, D or Non-Hazardous Location Only.
WARNING - Explosion Hazard - Substitution of Components May Impair Suit-
ability For Class I, Div. 2.
WARNING - Explosion Hazard - Do not Disconnect Equipment Unless Power
Has Been Switched Off Or The Area Is Known To Be Non-Hazardous.
6 Regulation and Standards
The DST1 Series has received the following certifications.
Certifying
organization
Standards
TÜV Rheinland IEC 61508 Part 1-7/12.98-05.00
EN 954-1: 1996
ISO 13849-1: 2006
EN/ISO 13849-2: 2003
IEC 61131-2: 2007
EN 60204-1: 2006
EN 61000-6-2: 2005
EN 61000-6-4: 2007
EN/ISO 13850: 2006 (EN 418: 1992)
NFPA 79-2007
ANSI RIA15.06-1999, ANSI B11.19-2003
UL (See note.) UL 1998
UL 508
UL 1604 (except for DST1-MRD08SL-1)
NFPA 79
IEC 61508
CSA 22.2 No. 142
CSA 22.2 No. 213 (except for DST1-MRD08SL-1)

Table of Contents

Related product manuals