ix
About this Manual:
This manual describes the installation and operation of a DST1-series Safety I/O Terminals (referred to
as the DST1 in this manual).
Please read this manual carefully and be sure you understand the information provided before
attempting to install or operate the DST1. Be sure to read the precautions provided in the following
section.
The following manuals provide information on the DeviceNet and DeviceNet Safety.
Manual Products Contents Cat. No.
DeviceNet Safety DST1-series Safety
I/O Terminals Operation Manual
(This manual)
DST1-series Safety I/O
Terminals
Information on DST1-series
Safety I/O Terminals
Z904
DeviceNet Safety System Configuration
Manual
WS02-CFSC1-E Information on using the Net-
work Configurator
Z905
DeviceNet Safety Network Controller
Operation Manual
NE1A Series:
NE1A-SCPU01(-V1)
NE1A-SCPU02
NE1A-SCPU01-EIP
NE1A-SCPU02-EIP
Specifications, performance
information, and operating
procedure for NE1A-series
Safety Network Controllers.
Z906
DeviceNet Safety NE0A Series Safety
Network Controller Operation Manual
NE0A Series: NE0A-
SCPU01
Specifications, functions, and
usage of the NE0A-series
Safety Network Controllers.
Z916
DeviceNet Operation Manual Describes the network configuration and connection
modes of a DeviceNet network. Also provides details on
connection methods, specifications, and power supply
methods to the communications systems of connection
devices, such as cables and connectors.
W267
!WARNING Failure to read and understand the information provided in this manual may result in per-
sonal injury or death, damage to the product, or product failure. Please read each section
in its entirety and be sure you understand the information provided in the section and
related sections before attempting any of the procedures or operations given.
To Next Page
Loading...
Need help?
General
