Omron E5*C Series User Manual

6 - 61
6 Parameters
E5@C-T Digital Temperature Controllers User’s Manual (H185)
6-9 Initial Setting Level
6
eset
Operation End Operation
This parameter sets the operation to perform when the program has been completed.
• Reset: Operation ends
• Continue: Operation is continued using the SP of the last segment. The final
segment number is held and the elapsed program time is held. The
Hold and Advance parameters cannot be used. The time signals hold
the status at the end of operation.
• Fixed SP Mode: Operation continues in Fixed SP Mode when the program has been
completed. The segment number and elapsed program time return to
the start and are held. Time signals are turned OFF before the end of
program operation. The program is restarted when the SP Mode
parameter is changed to Program SP (PSP).
* The Fixed SP Mode cannot be selected if the reset operation is set to fixed SP opera-
tion.
z Rated Sections
5-15 Program-related Functions (page 5-53)
Function
Setting
Setting range Unit Default
rst: Reset
cont: Continue
fsp: Fixed SP Mode*
--- rst: Reset
See
See

Omron E5*C Series Specifications

General

Brand	Omron
Model	E5*C Series
Category	Controller
Language	English