Omron E5*C Series User Manual

6 - 107
6 Parameters
E5@C-T Digital Temperature Controllers User’s Manual (H185)
6-10 Advanced Function Setting Level
6
spd1
PV/SP No. 1 Display Selection
spd2
PV/SP No. 2 Display Selection
These parameters set the items to display on the No. 1 display, No. 2 display, and No. 3 dis-
play.
Function
Setting
Set value No. 1 display No. 2 display
No. 3 display
(E5EC-T/E5AC-T only)
0 Nothing is displayed. Nothing is displayed. Nothing is displayed.
1 Process value Set point Nothing is displayed.
2 Process value Nothing is displayed. Nothing is displayed.
3 Set point SP (character display) Nothing is displayed.
4 Process value Set point MV (valve opening for
Position-proportional Models)
5 Process value Set point MV monitor (cooling)
6 Process value Set point Program number and
segment number
7 Process value Set point Remaining segment time
Parameter Setting range Default
PV/SP No. 1 Display Selection
0 to 7
6
PV/SP No. 2 Display Selection E5CC-T: 0
E5EC-T/E5AC-T: 7

Omron E5*C Series Specifications

General

Brand	Omron
Model	E5*C Series
Category	Controller
Language	English