8.14 Communication setting level (l.5)
8-65
Setting data
• After changing the communication data length setting, execute a
software reset or turn the power off and on to make the change
effective.
• After changing the communication stop bit setting, execute a
software reset or turn the power off and on to make the change
effective.
• After changing the communication parity setting, execute a software
reset or turn the power off and on to make the change effective.
Communication data length
len
Protocol is CompoWay/F
l.5
Function
Setting
Setting range Units Default value
7 to 8 Bits 7
Communication stop bit
sbit
Protocol is CompoWay/F
l.5
Function
Setting
Setting range Units Default value
1 to 2 Bits 2
Communication parity
prty
l.5
Function
Setting
Setting range Units Default value
none: None
even: Even
odd : Odd
− even: Even
To Next Page
Loading...
