Omron G9SP Series Reference Manual

42
Safety Device Function Blocks Section 3-5
3-5 Safety Device Function Blocks
×: No, ❍: Yes
Section Function Blocks Support Page Compatible unit versions
Notation in
function list
Name G9SP NE1A
3-5-1 EDM External Device Monitoring
❍❍
43
3-5-2 Enable Switch Enable Switch Monitoring
❍❍
44 NE1A-series Controllers with unit
version 1.0 or later
3-5-3 E-STOP Emergency Stop Pushbut-
ton Monitoring
❍❍
47
3-5-4 Light Curtain Moni-
toring
Light Curtain Monitoring
❍❍
48
3-5-5 Muting Muting
❍❍
50 NE1A-series Controllers with unit
version 1.0 or later
3-5-10 Safety Gate Monitor-
ing
Safety Gate Monitoring
❍❍
65
3-5-11 Two Hand Controller Two-hand Controller
❍❍
70
3-5-12 User Mode Switch User Mode Switch Monitor-
ing
❍❍
72
3-5-13 Redundant Input Generic Two-input Switch
Monitoring
❍ ×
74
3-5-14 Single Beam Safety
Sensor
Single-beam Safety Sen-
sor Monitoring
❍ ×
74
3-5-15 Non-Contact Door
Switch
Non-contact Door Switch
Monitoring
❍ ×
74
3-5-16 Safety Mat Safety Mat Monitoring
❍ ×
75

Omron G9SP Series Specifications

General

Type	Safety Controller
Programming Software	Sysmac Studio
Supply Voltage	24 VDC
Input Voltage	24 VDC
Operating Temperature	-10 to 55°C
Protection Rating	IP20
Number of Safety Outputs	4
Safety Category	Category 4
Communication Interfaces	Ethernet/IP
Programming	Function block programming
Vibration Resistance	10 to 55 Hz
Weight	Varies depending on model