Omron G9SP Series

viii
Manual Configuration
Information on the operation of G9SP-series Safety Controllers is provided in the following manuals.
Refer to the specific manual depending on the information that is required.
Manual name Contents Cat. No.
G9SP-series Safety
Controller Instructions
Reference Manual
(this manual)
This manual describes the safety programming methods, provides the
specifications, and describes the functions and operating methods of the
G9SP-series Controller.
Z923
G9SP-series Safety
Controller Operation
Manual
This manual provides detailed specifications and describes functions
and application methods for the G9SP-series Controller in detail.
Z922
G9SP-series Safety
Controller Host Con-
nection Manual
This manual provides sample ladder programming and describes how to
connect to a Standard PLC from another manufacturer using the com-
munications functionality of the G9SP-series Controller's Option Board.
The procedure for connecting to a Standard PLC from another manufac-
turer is described in the G9SP Operation Manual.
Z924
1
2
3
4
5
6
7
8
G9SP-series Safety Controller
Operation Manual
(Cat. No. Z922)
G9SP-series Safety Controller
Instructions Reference Manual
(Cat. No. Z923)
• Precautions for installation in a panel
• Performing power supply wiring
• Performing I/O wiring
• Unit type, nomenclature, and specifications
• Configuring hardware
• Calculating safety response performance
G9SP-series Safety Controller Host
Connection Manual
(Cat. No. Z924)
Note: Provided only as a PDF file.
Troubleshooting
• Safety logic programming
• Function block operation specifications
System
configuration
settings
Installation
and Wiring
Support
Software
Startup
Software
settings and
programming
Control
PLC
Design
Checking
and
debugging
operation
Operation
and
Maintenance
• Sample ladder programming for the
control PLC
• Installing the Support Software (G9SP
Configurator)
• Starting the Support Software
• Creating configuration data in the
Support Software
• Setting the control PLC to
communicate with the G9SP
• Downloading configuration data to the
G9SP
• Checking operation using the Support
Software
• Replacement at G9SP failure
• Updating the configuration data in the
G9SP
• Corrective measures and error codes
for troubleshooting
This manual