7 - 3
7 Specifications
Grid Connect Photovoltaic Inverter KP100L-OD- USER’S MANUAL
7-1 Standard Specification List
7
*1 The specification of KP100L-OD-EU-T is same as KP100L-OD-EU.
*2 Ambient temperature is measured 10cm below of the inverter. There is few influence of self-heating from the inverter
because wind of the FAN blow from lower side to upper side, then temperature 10cm below of the inverter is same as
surrounding temperature of the inverter.
Other
External
interfaces
Data transmission
(electrically-isolated)
RS-232C/RS-485
Input signal
Input voltage : 24V
(Input current : 10mA)
Relay outputs
NO contact : 2
250VAC,3A or 30VDC,3A(Resistance load)
Certifications
EMC (KP100L-OD-EU)
(*1)
EN 61000-6-2
EN 61000-6-3
EN 61000-3-2
Low voltage regulation
(KP100L-OD-EU)
(*1)
EN50178
German regulation
(KP100L-OD-EU)
(*1)
VDE0126-1-1
Spanish regulation
(KP100L-OD-EU)
(*1)
RD1663/2000
Italian regulation
(KP100L-OD-EU)
(*1)
ENEL Guideline
Enclosure
Degree of protection (acc. to DIN EN
60529)
Housing: IP65
Dimensions
and Weight
Dimensions (W x H x D) 455 x 700 x 270 mm
Weight Approx. 42 kg
Ambient
Conditions for
Operation
(*2)
Operating temperature range 20 to 60C
Continuous nominal output power
temperature range
20 to 40C
Tolerable relative humidity 4 to 100%, none-condensing
Efficiency
Max. efficiency 97.5%
European efficiency 97.1%
Item Specification
To Next Page
Loading...
