Omron KP100L-OD - 12-2010 - State Display

3 - 9
3 Operation
Grid Connect Photovoltaic Inverter KP100L-OD- USER’S MANUAL
3-4 State Display
3
9
3-4 State Display
The display according to the state of the KP100L is done. State Display includes Normal Display and Error
Display.
 Normal Display
When the error doesn't occur in the KP100L, the follow content corresponding to the state of the KP100L is
displayed.
The Display [2] shows data and the state corresponding to the state of KP100L at that time.
The Display [3] shows the measurement value. Select the measurement value that you want to display by
pushing the "<<" or ">>" key. The displayed item is changed every 0.5 seconds when you keep pushing the "<<"
or ">>" key. The Display [1] shows the item name of the data displayed in the Display [3].
Refer to the follow table for the item that you can select.
State Display (example) Content of Date
Countdown 30s Start-up delay time
Start waiting Standby -
Running 1.23kW AC Power
Stopping OFF -
Item name Measurement Value Data display form
Pac AC Power(L1 phase/L2 phase/L3 phase) 1.23/1.23/1.23kW
Pdc1/2/3 DC Power (DC1/DC2/DC3) 1.23/1.23/1.23kW
Vac Grid Voltage(L1 phase/L2 phase/L3 phase) 230/230/230V
Freq Grid Frequency 50.0Hz
Iac AC Current (L1 phase/L2 phase/L3 phase) 12.3/12.3/12.3A
Vdc1/2/3 DC Voltage (DC1/DC2/DC3) 400/400/400V
Idc1/2/3 DC Current (DC1/DC2/DC3) 12.3/12.3/12.3A
E-today Daily energy production 123.4kWh
H-total accumulated operation time 123456hr
E-total Total Periodic Energy (accumulated energy from time user reset) E-total can be reset
by user. Refer to section "User Setting" in "3-5" [15] Clear of Total Periodic Energy
12345kWh
Pac 3.69kW
Pdc1/2/3 3.69kW
1.28/1.28/1.28kW
<<
<<
>>
>>
Pac 30s
Pac Standby
Countdown
end
preparation
completion
Pdc1/2/3 30s
<<
<<
>>
>>
Pdc1/2/3 Standby
0.00/0.00/0.00kW
0.00/0.00/0.00kW
<<
<<
>>
>>
Start waiting Display
Countdown Display
Running Display
0.00/0.00/0.00kW
0.00/0.00/0.00kW
1.23/1.23/1.23kW