Omron KP100L-OD - 12-2010 - Options

2 Design
2 - 28
Grid Connect Photovoltaic Inverte KP100L-OD-USER’S MANUAL
2-8 Options
The screw of hexagon (For Italy)
The customer who uses KP100L in Italy must buy the following screw. And, fix Cover foreside R according to the
following procedure. This is a requirements of ENEL guideline.
Execute the procedure below to seal the cover foreside after AC connection.
(1) Remove the screw 2 points where cover foreside R is fixed, and fix with the bought screw.
(Tightening torque :1.5 to 1.7 Nm)
(2) Pass the steel wire through the part of the fixed hole of 2 screws. And, pass the steel wire through
attachment as shown the figure.