Omron KP100L-OD - 12-2010 - Page 62

2 - 29
2 Design
Grid Connect Photovoltaic Inverte KP100L-OD-USER’S MANUAL
2-8 Options
2
(3) Pull the wires as shown in figure. Once you pull the wire firmly, you can not loose it.
DC SWITCH
It is necessary to use DC switch or circuit breaker which complies to the installation standard for photovoltaic
systems (VDE0100-712).
When you install where you require the DC switch such as Germany, please consult your OMRON representative