12
Grid Connect Photovoltaic Inverte KP100L-OD-USER’S MANUAL
Surge protection
• Install the surge measures circuit corresponding to the output voltage
• and input voltage to protect the inverter from the lightning surge.
• To do a steady operation, install and use the product in places where the following situations are avoided.
(1) Locations where surge voltage of the grid is generated by influence of neighborhood facilities and
equipment.
(2) Locations where the grid is unstable caused by influence of neighborhood facilities and equipment.
(3) In factory or the vicinity where the grid is unstable.
(4) Locations subject to noise that ungrounded consumer electronics generate.
Maintenance o Inspection
• Confirm that there is no abnormality such as rust on outside of the product during the maintenance.
Storage
• Store in locations where the temperature is within the range of 25 to 60C
• (with no condensation or icing), and the humidity is 95 % maximum.
• Store in locations that is no more than 2,000 m above sea level.
To Next Page
Loading...
Need help?
General
