Omron KP100L-OD - 12-2010 - Page 49

2 Design
2 - 16
Grid Connect Photovoltaic Inverte KP100L-OD-USER’S MANUAL
(5)-1 RS-232C
Connect the wire to 1: RS-232C(TXD), 2 : RS-232C(RXD), and 3 : GO of communication terminal block
(TB401). When you connect the wire, insert the wire while pushing the black button of TB401 and
release the button.
*Note: Note the wrong wiring of the signal wire, and the catch of the insulating coating.
(5)-2 RS-485
(5)-2-1 Wiring for RS-485
Connect the wire to 3: GO, 4: RS-485_DB(+), 5: RS-485_DA(-) of communication terminal
block(TB401). When you connect the wire, insert the wire while you push the black button of TB401
and release the button.
*Note: Note the wrong wiring of the signal wire, and the catch of the insulating coating.
TB402
TB401
Black button
12345678910
GO
RS-232C(TXD)
RS-232C(TXD)
TB402
TB401
Black button
12345678910
GO RS-485_DB(+) RS-485_DA(-)