Omron KP100L-OD - 12-2010 - Page 56

2 - 23
2 Design
Grid Connect Photovoltaic Inverte KP100L-OD-USER’S MANUAL
2-4 Wiring
2
For the DC terminal of the KP100L, use the standard MC4 connectors.
Model type of connectors is shown below.
Multi-Contact sells the conversion cable to MC3 and MC4(PV-A-KBT3/KST4,PV-A-KBT3/KST3). If you use MC3
series in the solar module, refer to these conversion cable below.
Solar module side (MC4 series) KP100L side (MC4 series)
Solar module side (MC3 series) KP100L side (MC4 series)
Do not disconnect
under load
PV-KST4
PV-KBT4
PV-ADBP4
PV-ADSP4
PV-KST3
PV-KBT3
PV-ADBP4
PV-ADSP4
PV-A-KBT3 / KST4
PV-A-KBT4 / KST3