Omron NT21 User Manual

2-8SectionNumeral Display
141
The relationship between the properties of a numeral display and the displayed
numeric value is indicated below.
Properties
General
Position Coordinates of the top left corner of the field in which the numeric
value is displayed.
Font Type Font for the characters
Standard/Half Height/Double Width
Scale Scale at which the numeric value is displayed (Enlarged
display, page 142).
11 (Equal), 12 (High), 21 (Wide), 22, 33, 44,
88
Smoothing Whether or not smoothing is used for numerals with a scale of
22 or larger (Smoothing, page 143).
Check mark (smoothing executed)/
No check mark (smoothing not executed)
Attribute Display mode for the numerals (Display attributes and drawing
result, page 142).
Standard/Flash/Inverse Flash
Color
Foreground Display color of the numerals (Colors other than black and white
are available with the NT31C and NT631C only.)
Black/Blue/Red/Magenta/Green/Cyan/Yellow/White
Background Background color of the numerals (Colors other than black
and white are available with the NT31C and NT631C only.)
Black/Blue/Red/Magenta/Green/Cyan/Yellow/White
Settings
Reference
Indirect
Reference
Method for referencing the numeral memory table entry
(Direct reference and indirect reference, page 143)
Check mark (Indirect Reference)/
No check mark (Direct Reference)
Table Entry Numeral memory table entry number referenced for display
(Direct reference and indirect reference, page 143)
4-digit BCD value
 When Direct Reference is specified:
Table entry number of the numeral memory table entry in
which the numeric value to be displayed is stored
 When Indirect Reference is specified:
Table entry number of the numeral memory table entry in
which the number of the numeral memory table entry whose
contents are to be displayed is stored.
Display Type Display format for the numeric value (Stored data and
displayed numeric value, page 144)
Decimal/Hexadecimal
Format (Number of digits displayed, page 143)
Integer Number of digits in the integer part of the numeric value
Decimal Number of digits in the decimal fraction of the numeric value
Common Attributes

Omron NT21 Specifications

General

Brand	Omron
Model	NT21
Category	Touch terminals
Language	English