Omron NX-ECC201 User Manual

Related Manuals
30
NX-series EtherCAT Coupler Unit User’s Manual (W519)
NX-series Analog I/O
Units User’s Manual
W522 NX-AD
NX-DA
NX-TS
Learning how to
use NX-series
Analog I/O Units
and Temperature
Input Units
The hardware, setup methods, and
functions of the NX-series Analog I/O
Units and Temperature Input Units are
described.
NX-series System Units
User’s Manual
W523 NX-PD1
NX-PF0
NX-PC0
NX-TBX01
Learning how to
use NX-series
System Units
The hardware and functions of the
NX-series System Units are described.
NX-series Position Inter-
face Units User’s Man-
ual
W524 NX-EC0
NX-ECS
NX-PG0
Learning how to
use NX-series
Position Interface
Units
The hardware, setup methods, and
functions of the NX-series Incremental
Encoder Input Units, SSI Input Units,
and Pulse Output Unit are described.
NX-series Data Refer-
ence Manual
W525 NX- Referencing lists of
the data that is
required to config-
ure systems with
NX-series Units
Lists of the power consumptions,
weights, and other NX Unit data that is
required to configure systems with
NX-series Units are provided.
NJ-series CPU Unit
Motion Control User's
Manual
W507 NJ501-
NJ301-
Learning about
motion control set-
tings and program-
ming concepts.
The settings and operation of the CPU
Unit and programming concepts for
motion control are described. When
programming, use this manual together
with the NJ-series CPU Unit Hardware
User's Manual (Cat. No. W500) and
NJ-series CPU Unit Software User's
Manual (Cat. No. W501).
NJ-series Instructions
Reference Manual
W502 NJ501-
NJ301-
Learning detailed
specifications on
the basic instruc-
tions of an
NJ-series CPU
Unit.
The instructions in the instruction set
(IEC 61131-3 specifications) are
described.
When programming, use this manual
together with the NJ-series CPU Unit
Hardware User's Manual (Cat. No.
W500) and NJ-series CPU Unit Soft-
ware User's Manual (Cat. No. W501).
NJ-series Motion Con-
trol Instructions Refer-
ence Manual
W508 NJ501-
NJ301-
Learning about the
specifications of
the motion control
instructions.
The motion control instructions are
described. When programming, use
this manual together with the NJ-series
CPU Unit Hardware User's Manual
(Cat. No. W500), NJ-series CPU Unit
Software User's Manual (Cat. No.
W501) and NJ-series CPU Unit Motion
Control User's Manual (Cat. No.
W507).
Sysmac Studio Version
1 Operation Manual
W504 SYSMAC-
SE2
Learning about the
operating proce-
dures and func-
tions of the
Sysmac Studio.
Describes the operating procedures of
the Sysmac Studio.
Manual name Cat. No. Model numbers Application Description

Omron NX-ECC201 Specifications

General

Brand	Omron
Model	NX-ECC201
Category	Controller
Language	English