Omron NX-ECC201

29
Related Manuals
NX-series EtherCAT Coupler Unit User’s Manual (W519)
Related Manuals
The following manuals are related to the NJ-series Controllers. Use these manuals for reference.
Manual name Cat. No. Model numbers Application Description
NX-series EtherCAT
Coupler Unit User’s
Manual (this manual)
W519 NX-ECC201 Leaning how to
use an NX-series
EtherCAT Coupler
Unit and Ether-
CAT Slave Termi-
nals
The following items are described: the
overall system and configuration meth-
ods of an EtherCAT Slave Terminal
(which consists of an NX-series Ether-
CAT Coupler Unit and NX Units), and
information on hardware, setup, and
functions to set up, control, and monitor
NX Units through EtherCAT.
NJ-series CPU Unit
Hardware User´s Man-
ual
W500 NJ501-
NJ301-
Learning the basic
specifications of
the NJ-series CPU
Units, including
introductory infor-
mation, designing,
installation, and
maintenance.
Mainly hardware
information is pro-
vided.
An introduction to the entire NJ-series
system is provided along with the fol-
lowing information on the CPU Unit.
• Features and system configuration
• Overview
• Part names and functions
• General specifications
• Installation and wiring
• Maintenance and Inspection
Use this manual together with the
NJ-series CPU Unit Software User's
Manual (Cat. No. W501).
NJ-series CPU Unit
Software User's Manual
W501 NJ501-
NJ301-
Learning how to
program and set
up an NJ-series
CPU Unit.
Mainly software
information is pro-
vided.
The following information is provided
on an NJ-series CPU Unit.
• CPU Unit operation
• CPU Unit features
• Initial settings
• Programming based on IEC 61131-3
language specifications
Use this manual together with the
NJ-series CPU Unit Hardware User's
Manual (Cat. No. W500).
NJ-series CPU Unit
Built-in EtherCAT Port
User's Manual
W505 NJ501-
NJ301-
Using the built-in
EtherCAT port on
an NJ-series CPU
Unit.
Information on the built-in EtherCAT
port is provided.
This manual provides an introduction
and provides information on the config-
uration, features, and setup.
Use this manual together with the
NJ-series CPU Unit Hardware User's
Manual (Cat. No. W500) and NJ-series
CPU Unit Software User's Manual (Cat.
No. W501).
NX-series Digital I/O
Units User’s Manual
W521 NX-ID
NX-OC
NX-OD
Learning how to
use NX-series Dig-
ital I/O Units
The hardware, setup methods, and
functions of the NX-series Digital I/O
Units are described.