Omron NX-SID Series User Manual

Event name Event Log Cleared Event code 90400000 hex
Meaning The event log was cleared.
Source Depends on where the Sysmac
Studio is connected and the sys-
tem configuration.
Source details NX Unit Detection tim-
ing
When com-
manded from
user
Error attrib-
utes
Level Information Recovery --- Log category Access
Effects User program Continues. Operation Not affected.
System-de-
fined varia-
bles
Variable Data type Name
None None None
Cause and
correction
Assumed cause Correction Prevention
The event log was cleared by the
user
.
--- ---
Attached in-
formation
Attached infor-
mation 1:
Cleared events
1: The system event log was cleared.
2: The access event log was cleared.
Precautions/
Remarks
None
Event name Memory All Cleared Event code 90430000 hex
Meaning The Unit settings were cleared.
Source Depends on where the Sysmac
Studio is connected and the sys-
tem configuration.
Source details NX Unit Detection tim-
ing
When com-
manded from
user
Error attrib-
utes
Level Information Recovery --- Log category Access
Effects User program Continues. Operation The Unit settings are cleared.
System-de-
fined varia-
bles
Variable Data type Name
None None None
Cause and
correction
Assumed cause Correction Prevention
The Clear All Memory operation
was performed.
--- ---
Attached in-
formation
Attached infor-
mation 1:
Unit number of the NX Unit where the Clear All Memory operation was performed
Attached infor-
mation 2:
Execution results
0: Successful
1: Hardware error
2: Initialization failed
3: Initialization not possible
Precautions/
Remarks
Refer to the attached information for the results of the Clear All Memory operation.
12 Troubleshooting
12 - 89
NX-series Safety Control Unit User's Manual (Z930)
12-3 Checking for Errors with the Sysmac Studio
12
12-3-4 Error Descriptions

Omron NX-SID Series Specifications

General

Brand	Omron
Model	NX-SID Series
Category	Controller
Language	English