5 Setting Up EtherCAT Communications with the Sysmac Studio
5-30
NJ/NX-series CPU Unit Built-in EtherCAT Port User’s Manual (W505)
4
Click the Apply actual network configuration Button.
The actual network configuration is duplicated in the network configuration on Sysmac Studio,
and the Comparison results Column shows that everything in the configurations matches. (The
network configuration on the Sysmac Studio is created based on the actual network configura-
tion.)
5
Click the Close Button.
6
Go offline, and then assign device variables, set the axis parameters, set up the tasks, and set
the master and slave parameters.
To Next Page
Loading...
