Related Manuals
24
NJ/NX-series CPU Unit Built-in EtherCAT Port User’s Manual (W505)
NJ/NX-series Instructions
Reference Manual
W502 NX701-
NX102-
NX1P2-
NJ501-
NJ301-
NJ101-
Learning detailed specifi-
cations on the basic
instructions of an NJ/NX-
series CPU Unit.
The instructions in the instruction set (IEC
61131-3 specifications) are described.
NJ/NX-series CPU Unit
Motion Control User’s
Manual
W507 NX701-
NX102-
NX1P2-
NJ501-
NJ301-
NJ101-
Learning about motion
control settings and pro-
gramming concepts.
The settings and operation of the CPU Unit and
programming concepts for motion control are
described.
NJ/NX-series
Motion Control Instruc-
tions Reference Manual
W508 NX701-
NX102-
NX1P2-
NJ501-
NJ301-
NJ101-
Learning about the specifi-
cations of the motion con-
trol instructions.
The motion control instructions are described.
NJ/NX-series
CPU Unit
Built-in EtherCAT Port
User’s Manual
W505 NX701-
NX102-
NX1P2-
NJ501-
NJ301-
NJ101-
Using the built-in EtherCAT
port on an NJ/NX-series
CPU Unit.
Information on the built-in EtherCAT port is pro-
vided.
This manual provides an introduction and pro-
vides information on the configuration, features,
and setup.
NJ/NX-series
CPU Unit
Built-in EtherNet/IP
Port
User’s Manual
W506 NX701-
NX102-
NX1P2-
NJ501-
NJ301-
NJ101-
Using the built-in Ether-
Net/IP port on an NJ/NX-
series CPU Unit.
Information on the built-in EtherNet/IP port is
provided.
Information is provided on the basic setup, tag
data links, and other features.
NJ/NX-series CPU Unit
OPC UA User’s Manual
W588 NX102-
NJ501-100
Using OPC UA.
An introduction to the OPC UA is provided.
NX-series CPU Unit
FINS Function User’s
Manual
W596 NX701-20
NX102-
Using the FINS function on
the NX-series CPU Unit.
An introduction to the FINS function on the
NXseries CPU Unit is provided.
NJ/NX-series
Database Connection CPU
Units
User’s Manual
W527 NX701-20
N
X102
-
20
NJ501-
20
NJ101-
20
Using the database con-
nection service with
NJ/NX-series Controllers.
Describes the database connection service.
NJ-series
SECS/GEM CPU Units
User’s Manual
W528 NJ501-1340 Using the GEM Services
with NJ-series Controllers.
Provides information on the GEM Services.
NJ-series NJ Robotics
CPU Unit User’s Manual
W539 NJ501-4 Controlling robots with NJ-
series CPU Units.
Describes the functionality to control robots.
NJ/NY-series NC Inte-
grated Controller User’s
Manual
O030
NJ501-5300
NY532-5400
Performing numerical con-
trol with NJ/NY-series Con-
trollers.
Describes the functionality to perform the
numerical control. Use this manual together with
the NJ/NY-series G code Instructions Reference
Manual (Cat. No. O031) when programming.
NJ/NY-series
G code Instructions Ref-
erence Manual
O031
NJ501-5300
NY532-5400
Learning about the specifi-
cations of the G code/M
code instructions.
The G code/M code instructions are described.
Use this manual together with the NJ/NY-series
NC Integrated Controller User's Manual (Cat.
No. O030) when programming.
NJ/NX-series
Troubleshooting Manual
W503 NX701-
NX102-
NX1P2-
NJ501-
NJ301-
NJ101-
Learning about the errors
that may be detected in an
NJ/NX-series Controller.
Concepts on managing errors that may be
detected in an NJ/NX-series Controller and
information on individual errors are described.
Manual name Cat. No. Model numbers Application Description
To Next Page
Loading...
Need help?
General
