Omron NX1P User Manual

64
5. Insert the GetTime function and enter “EndTime” as the output variable name.
6. Insert the SUB_DT_DT (Subtract Date and Time) instruction to subtract StartTime from
EndTime.
Enter “LapTime” as the output variable name.
7. Click the Variables Bar at the top of the window to check the variable table.
StartTime and EndTime are registered as DATE_AND_TIME (date and time) data and
LapTime as TIME (durations) data.
The data types are automatically set according to the used instructions.

Omron NX1P Specifications

General

Brand	Omron
Model	NX1P
Category	Controller
Language	English