Safety Precautions
10
G5-series AC Servomotors and Servo Drives User’s Manual (with Built-in EtherCAT Communications)
The Servo Drive bears a warning label at the following location to provide handling warnings.
When handling the Servo Drive, be sure to observe the instructions provided on this label.
Maintenance and Inspection
After replacing the Servo Drive, transfer to the new Servo Drive all data needed to resume
operation, before restarting operation.
Equipment damage may result.
Never repair the Servo Drive by disassembling it.
Electric shock or injury may result.
Be sure to turn OFF the power supply when the Servo Drive is not going to be used for a
prolonged period of time.
Injury may result.
Location of Warning Label
Caution
Warning label display location
(R88D-KN02H-ECT)
VOLTAGE
100~120V
1Ø 3Ø
0-120V
INPUT OUTPUT
PHASE
2.6A
50/60Hz
0~500.0Hz
1.7A
100W
A09080004
FREQ
POWER
OMRON Corporation
MADE IN JAPAN
SERIAL No.
F L C
To Next Page
Loading...
