1-17
1 Features and System Configuration
G5-series AC Servomotors and Servo Drives User’s Manual (with Built-in EtherCAT Communications)
1-5 Applicable Standards
1
1-5-3 Korean Radio Regulations (KC)
*1 For the use in combination with the Servomotor (Model: R88M-K11K015T-, the rated current is 100 A, and for
R88M-K15K015T-, it is 125 A.
*2 For the use in combination with the Servomotor (Model: R88M-K11K015C-), the rated current is 50 A and for
R88M-K15K015C-, it is 60 A.
• G5-series Servo Drives comply with the Korean Radio Regulations (KC).
• G5-series Servomotors is exempt from the Korean Radio Regulations (KC).
• Some Servo Drives conform to the SEMI F47 standard for momentary power interruptions (voltage
sag immunity) for no-load or light-load operation.
• This standard applies to semiconductor manufacturing equipment.
Note 1 It does not apply to Servo Drivers with single-phase 100-V specifications or with 24-VDC
specifications for the control power input.
2 Always perform evaluation testing for SEMI F47 compliance in the actual system.
Servo Drive model Rated current of circuit breaker (A)
R88D-KNA5L-ECT 10
R88D-KN01L-ECT 10
R88D-KN02L-ECT 10
R88D-KN04L-ECT 10
R88D-KN01H-ECT 10
R88D-KN02H-ECT 10
R88D-KN04H-ECT 10
R88D-KN08H-ECT 15
R88D-KN10H-ECT 15
R88D-KN15H-ECT 20
R88D-KN20H-ECT 30
R88D-KN30H-ECT 50
R88D-KN50H-ECT 50
R88D-KN75H-ECT 60
R88D-KN150H-ECT
100/125
*1
R88D-KN06F-ECT 15
R88D-KN10F-ECT 15
R88D-KN15F-ECT 15
R88D-KN20F-ECT 20
R88D-KN30F-ECT 30
R88D-KN50F-ECT 30
R88D-KN75F-ECT 30
R88D-KN150F-ECT
50/60
*2
1-5-3 Korean Radio Regulations (KC)
1-5-4 SEMI F47
To Next Page
Loading...
