Omron R88M-K - Page 233

3-93
3 Specifications
G5-series AC Servomotors and Servo Drives User’s Manual (with Built-in EtherCAT Communications)
3-5 Cable and Connector Specifications
3
3-5-5 Connector Specifications
Angle plug model JN8FT04SJ1
(Japan Aviation Electronics)
Socket contact model ST-TMH-S-C1B-3500-(A534G)
(Japan Aviation Electronics)
Angle plug model JN4FT02SM-R
(Japan Aviation Electronics)
Socket contact model ST-TMH-S-C1B-3500-(A534G)
(Japan Aviation Electronics)
Power Cable Connector (R88A-CNK11A)
This connector is used for power cables.
Use it when preparing a power cable by yourself.
Brake Cable Connector (R88A-CNK11B)
This connector is used for brake cables.
Use it when preparing a brake cable by yourself.
17.6
28.8
Ø13
32
27.6
22
12
R5.5
14.7
13.5
3
11
11
For the angle plug, cable pulling out direction can
be reversed.
Note If you reverse the direction, you cannot attach the
Connector to Servomotors of 50 W and 100 W.
Applicable motors
100-V, 3,000-r/min Servomotors of 50 to 400 W
200-V, 3,000-r/min Servomotors of 50 to 750 W
29.6
12.3
17
12.5 14.3
19
2.5
11.8
R6
12.7
Ø11.6
(8.8)
R4
For the angle plug, cable pulling out direction can
be reversed.
Applicable motors
100-V, 3,000-r/min Servomotors of 50 to 400 W
200-V, 3,000-r/min Servomotors of 50 to 750 W