!
!
!
!
!
!
!
!
!
!
!
WARNING Be sure confirm that the RUN signal is turned OFF before turning ON the power
supply, resetting the alarm, or switching the LOCAL/REMOTE selector. Doing so
while the RUN signal is turned ON may result in injury.
Caution Be
sure to confirm permissible ranges of motors and machines before operation be
-
cause
the Inverter speed can be easily changed from low to high. Not doing so
may
result in damage to the product.
Caution Provide
a separate holding brake when necessary
. Not doing so may result in injury
.
Caution Do
not perform
a signal check during operation. Doing so may result in injury or dam
-
age to the product.
Caution Do not carelessly change settings. Doing so may result in injury or damage to the
product.
Maintenance and Inspection Precautions
WARNING Do not touch the Inverter terminals while the power is being supplied.
WARNING Maintenance or inspection must be performed only after turning OFF the power
supply,
confirming that the CHARGE indicator (or
status indicators) is turned OFF
,
and
after waiting for the time specified on the front cover
. Not doing so may result in
electrical shock.
WARNING Maintenance, inspection, or parts replacement must be performed by authorized
personnel. Not doing so may result in electrical shock or injury.
WARNING Do not attempt to take the Unit apart or repair. Doing either of these may result in
electrical shock or injury.
Caution Carefully handle the Inverter because it uses semiconductor elements. Careless
handling may result in malfunction.
Caution Do
not change wiring, disconnect connectors or Operator
, or replace
fans while pow
-
er is being supplied. Doing so may result in injury or malfunction.
To Next Page
Loading...
Need help?
General
