3-3
Appearance FunctionName
Mode Key Switches the setting and monitor item indicators
in sequence.
Parameter setting being made is canceled if this
key is pressed before entering the setting.
Increment Key Increases multi-function monitor numbers,
parameter numbers, and parameter set values.
Decrement Key Decreases multi-function monitor numbers,
parameter numbers, and parameter set values.
Enter Key Enters multi-function monitor numbers,
parameter numbers, and internal data values
after they are set or changed.
RUN Key Starts the Inverter running when the 3G3FV is in
operation with the Digital Operator.
STOP/RESET
Key
Stops the Inverter unless n06 is not set to
disable the STOP Key.
Preparing for Operation and Monitoring Chapter
3
To Next Page
Loading...
