Omron SYSDRIVE 3G3JV Series

5-14
D Setting the Key Sequential Frequency (n08)
•The Enter Key need not be pressed when changing the setting in n08. In that case, the
frequency reference will change when the set value is changed with the Increment or
Decrement Key while the data display is continuously lit.
n08 Key Sequential Frequency Setting Changes during
operation
No
Setting
range
0, 1 Unit of
setting
1 Default setting 0
Set Values
Value Description
0 Enter Key enabled (The set value is entered with the Enter Key pressed.)
1 Enter Key disabled (The set value set is entered immediately.)
Basic Operation Chapter 5