Omron SYSMAC C200H-NC112 User Manual

117
SECTION 5
Programming Examples
This section contains examples of possible applications of Positioning Control Unit commands, inputs, and outputs. The
first example (see Section 5–1) shows the minimum data required for operation. The second example (Section 5–2)
shows the use of only one positioning action under START augmented by RESET ORIGIN. Section 5–3 demonstrates
the use of external switches to control positioning actions, while Sections 5–4 and 5–5 show use of TRANSFER DATA:
the example in Section 5–4, from the PC, and in Section 5–5, from external switches. Section 5–6 shows a complex series
of positioning actions under START. The example in Section 5–7 illustrates possible search patterns under ORIGIN
SEARCH, while that in 5–8 illustrates one possible use of zones: controlling manual feeding operations. Section 5–9
shows how to set speeds by multiplying speed units, and Section 5–10 shows a program with multiple banks. Refer to the
Appendixes or individual operation or command descriptions for details.
5–1 Operation with Minimum Data (Displaying JOG Positions) 118 . . . . . . . . . . . . . . . . .
5–2 Positioning at Intervals Using RESET ORIGIN 119 . . . . . . . . . . . . . . . . . . . . . . . . . .
5–3 Feeding Selectively with START 121 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
5–4 TRANSFER DATA from Other PC Areas 123 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
5–5 TRANSFER DATA from External Switches 125 . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
5–6 Using START to Carry Out Positioning Actions 128 . . . . . . . . . . . . . . . . . . . . . . . . . .
5–7 Using Origin and Origin Proximity Signals 132 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
5–8 Using Zones to Control Jogging 132 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
5–9 Setting Speeds 134 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
5–10 Using a Multiple Bank Program 134 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Omron SYSMAC C200H-NC112 Specifications

General

Brand	Omron
Model	SYSMAC C200H-NC112
Category	Control Unit
Language	English