51
Group DescriptionName
Utility
Data Area Lists Displays lists (such as used areas and cross-references) in accordance with the
contents of the user program in the system work area.
Change
Addresses
Globally changes bit and word addresses in the user program in the system
work area.
Print Lists Prints lists, ladder diagrams, and mnemonics in accordance with the contents of
the user program in the system work area.
EPROM/Memory
Card
Writes, reads, and compares the user program between the PROM
Writer/Memory Card and system work area.
Program
Conversion
C500 → C2000H:
Converts C500-family programs to C2000H programs.
C2000H
→ CVM1:
Converts C2000H-family programs to CVM1 programs
Create Library
File
Creates a library on a floppy disk or hard disk for use as an LSS data disk.
Time Chart
Monitor
Accesses the time chart monitor data produced online. (C-series PCs only)
Instruction Trace Accesses the instruction trace data produced online. (C-series PCs only)
Data trace Accesses the data trace data produced online.
Set Instructions Used to assign instructions to function codes in the instructions table and to
save and retrieve instructions tables to and from data disk files. (C-series PCs
only)
Retrieve/Save
Instr
Used to save and retrieve expansion instruction sets to and from data disk files.
(C-series PCs only)
PC Setup Used to set the PC operating parameters in the PC Setup and to save and
retrieve PC Setups to and from data disk files.
Allocate UM Used to allocate parts of the user memory area for used as a Fixed DM Area
and/or I/O Comment Area. (C-series PCs only)
Edit PC ID
Used to create, edit, search for, or print PC IDs (names). (CVM1 PCs only)
Compare
Programs
Used to compare a program in a data disk with the program in the work file in
the computer. (CVM1 PCs only)
Customization
Used to change bit/word names, to define custom data areas, or to register HIS
instructions. (CVM1 PCs only)
Network Support
Table
Used to edit data link tables and routing tables for the SYSMAC NET and
SYSMAC LINK Systems.
File
Management
Directory Displays a file list. Wildcard names can be used to display only desired files.
Copy File Copies files on the same floppy disk or between different disks.
Change File Name Changes the name of a specified file.
Delete File Deletes a specified file.
LSS File
Management
Used to change between LSS-style data files and DOS-style data files.
Support Software Capabilities Section 4-1
To Next Page
Need help?
General
